img

官方微信

img

手机网站

服务热线:

0513-88400999

业务部:0513-88400999 周龙泰 13606279370(商务)

技术支持:丁宝勤 13906276368

传真:0513-88400998

E_mail:jszk@vip.163.com

国家级海安经济开发区白甸节能环保产业园兴甸路29号

版权所有©  江苏中矿重型装备有限公司  苏ICP备13032710号  网站建设:中企动力 南通                                      友情链接: 洁威科除尘设备

矿山机械

科技创新,精益求精

浏览量

悬臂斗轮取料机

所属分类
没有此类产品
产品描述

  悬臂斗轮取料机是钢厂、电厂、码头等企业原料场物料均化设备。我司目前具有取料能力600t/h~3000t/h各种规格。悬臂斗轮取料机由斗轮机构、上部金属结构、变幅机构、回转机构、走行机构、电气室、司机室电气控制系统等组成。

  工作时,主机行走至将要取料料堆位置,地面出料皮带启动运行后,悬臂皮带机启动运行。随后斗轮机构及回转机构运行开始取料,变幅机构配合取料作周期性动作。取料作业可分为定点取料和同层平移取料二种方法。

  Bucket wheel boom reclaimer is the mix the uniform equipment and used in the steel mill,power plant, wharfz disperses a grain of material, at present we have take material ability 600t/h-3000t/h each kind of specification. The bracket bucket, wheel reclaimer consists of the bucket, wheel organization, upside the metal structure. the amplitude organization, the swiveling mechanism, walks the good organization, the electric panel room, the cab electric control system and so on.

  When working,the main engine walks to is going to take the material material to pile the position, after the ground leaves the material leather belt starts the movement, the bracket belt fastener starts the movement. Afterward the bucket-wheel organization and the swiveling mechanism movement starts to take the material, the amplitude organization matches the conjunction material to make the periodic movement. Takes the material work to be possible to divide Into the fixed point to take the material and to take the material two methods with the level,translation.

 

  技术参数表|Technical Date

 

性能参数名称 单位 LDQ1600 2400/35 LDQK600 1000/25 LDQZ800 1200/37.5 LDQK1100 1200/25 LDQZ1200 1600/40 LDQK1250 2000/30 LDQK1500 1500/45 LDQK1600 2500/30 LDQZ2500 7500/55
生产能力 堆料 取料 t/h t/h 2400 1600 1000 600 1200 800 1200 1100 1600 1200 2000 1250 1500 1500 2500 1600 7500 2500
堆取高度 轨上 轨下 m m 12 2 10 1 12 1 11 1 11 1 12 1.5 12 2 12 1.5 12 2
物料特性 堆比重粒度 t/h3 mm 2.2 <100 1.6-3.0 <100 0.5-2.2 <100 0.5-2.5 <100 2.2 <100 1.8-2.4 <100 2.2 <100 0.8-1 <100 2.2 <100
回转机构 回转半径回转角度 m ()° 35 ±110 25 ±110 37.5 ±110 25 ±110 40 ±110 30 ±110 45 ±110 30 ±110 55 ±110
前臂皮带机 带宽 带速 mm m/s 1400 3.15 1000 2.5 1200 2 1200 2 1200 1.6 1200 2.5 1000 2.5 1600 3.15 1800 3.15
轨距最大轮压调车速度工作速度荐用钢轨 M Kn m/min m/min kq/m 8 268 30 7 P50 6 250 30 5 P50 6 230 30 7 P50 6 250 30 7 P50 8 250 30 7 P50 7 250 30 7 P50 8 250 30 7 P50 7 250 30 7 P50 9 250 30 7 P50
装机总容量 总功率 kw 472 222 285 220 380 300 320 330 690
常用功率 kw 440 148 220 160 330 220 300 280 670
电源 电压 V 10000 380 6000 6000 6000 10000 6000 10000 10000
供电方 V 动力电缆卷筒滑线
控制方式     通讯电缆卷筒无线

未找到相应参数组,请于后台属性模板中添加
暂未实现,敬请期待
暂未实现,敬请期待
上一篇
下一篇
业务部:0513-88400999
周龙泰 13606279370(商务)
技术支持:丁宝勤 13906276368
传真:0513-88400998
E_mail:jszk@vip.163.com
地址:国家级海安经济开发区白甸节能环保产业园兴甸路29号